cancel
Showing results for 
Search instead for 
Did you mean: 

How to confiugure 40g ICX 7750 with

Dandy
New Contributor

Hello,

Can anyone guide me with 40g as I am configuring with Huawei with dac cable but when I loop it has light and when I insert in Huawei switch it shows incompatible.

This is the below information

 

show media eth 1/2/1
Port 1/2/1: Type : 40GBASE-Passive Copper 1m (Not supported)
Vendor: CISCO-OEM Version:
Part# : 40G-DAC-3M Serial#:************
ICX7750-48F Router>show media valida
validation media validation
ICX7750-48F Router>show media validation eth
ethernet port number
telnet@ICX7750-48F Router>show media validation ethernet 1/2/1

Port Supported Vendor Type
----------------------------------------------------------------------
1/2/1 No CISCO-OEM Type : 40GBASE-Passive Copper 1m (No t supported)
ICX7750-48F Router>^C
@ICX7750-48F Router>show version
Copyright (c) 1996-2015 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Oct 3 2016 at 17:14:14 labeled as NVASWR08040b9
(22909177 bytes) from Primary NVASWR08040b9.bin
SW: Version 08.0.40b9T203
Compressed Boot-Monitor Image size = 1835008, Version:10.1.05T205 (swz10105)
Compiled on Fri Mar 20 06:10:22 2015

HW: Stackable ICX7750-48F
Internal USB: Serial #: ************
Vendor: UB90QBK, Total size = 1914 MB
==========================================================================
UNIT 1: SL 1: ICX7750-48XGF 48-port Management Module
Serial #:CRH3*******
License: ICX7750_L3_SOFT_PACKAGE (LID: etjIIGKoFFb)
P-ASIC 0: type B852, rev 03 Chip BCM56852_A2
==========================================================================
UNIT 1: SL 2: ICX7750-QSFP 6-port QSFP 240G Module
==========================================================================
1500 MHz Power PC processor (version 8023/0022) 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
3840 MB DRAM
STACKID 1 system uptime is 24 day(s) 20 hour(s) 35 minute(s) 8 second(s)
The system started at 11:41:27 GMT+05:30 Thu Jan 01 1970

The system : started=cold start
*** NOT FOR PRODUCTION ***

7 REPLIES 7

Chandini
RUCKUS Team Member

Hi Dandy

Thank you for reaching out to us. From the details shared , looks like you are using a 3rd Party Transceiver with the switch and looks like its a CISCO vendor

Port 1/2/1: Type : 40GBASE-Passive Copper 1m (Not supported)
Vendor: CISCO-OEM 

Could you please help me with the output of below command. Execute in manager mode. 

  • Switch# Show media validation

Thanks 

 

Dandy
New Contributor

ICX7750-48F Router>show media validation

Port Supported Vendor Type
----------------------------------------------------------------------
1/1/47 No FINISAR CORP. Type : 10GE SR 300m ((SFP+))
1/1/48 No OEM Type : 10GE LR 10km ((SFP+))
1/2/1 No CISCO-OEM Type : 40GBASE-Passive Copper 1m (No t supported)

jdryan
RUCKUS Team Member

Hi Dandy, 

 

Adding on to the info shared by my colleague, when working with Multi-vendor systems, it would be bext we use Transceivers or GBICS that are compatible with respective vendor on the platform and also match each other [ GBICS ] interms of specifications. 

That way compatibility issues can be overcome. 

Hence here would suggest that we use 40G SFPs on either ends that are compatible with respective vendors, and both SFPs match each other interms of specs. 

That should help.

the below document should help interms of selection on the SFPs on the 7750 end. 
https://www.commscope.com/globalassets/digizuite/61722-ds-ethernet-optics-family.pdf 

Do let us know if this helps !

Thanks ! 

 

 

Dandy
New Contributor

Hey,

As i seen the list and as you suggest both ends should be compatible I have Huawei s6720-30C-EI-24S-AC but looping the dac cable it gets enable and light are indicated.