CommScope RUCKUS Community Forums

alvis_douthit · ‎08-30-2018

How do you show the arp table on a ICX 7450 running 08.0.30q ?
Our previous version: 07.3.00j that ran on the FCX 648 you could simply issue a "sh arp" command.

BenBeck · ‎08-30-2018

Should be there then as long as we are resolving the arp for that host. If another switch is the gateway for the host, we won't (or don't need) to keep track of it.

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

alvis_douthit · ‎08-30-2018

Thank you

alvis_douthit · ‎08-30-2018

Ben, It doesn't show everything in the arp table when I do a "sh arp" in 8030q.

netwizz · ‎08-30-2018

You might need to do a ping sweep first. Sh Arp works fine in 08.00.30Q. I just checked

scott_farrand_f · ‎08-31-2018

Arp will not show anything if your management vlan isn't the client vlan. If you're trying to hunt down a given device, it's a little more complicated, and you'd need to start from your routing switch/device.