This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Ruckus Wireless
RUCKUS Self Help |   ASK the Pack
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

How do you show the arp table on a ICX 7450 running 08.0.30q ?

alvis_douthit
New Contributor II

‎08-30-2018 11:00 AM

How do you show the arp table on a ICX 7450 running 08.0.30q ?
Our previous version: 07.3.00j that ran on the FCX 648 you could simply issue a "sh arp"  command.
10 REPLIES 10

BenBeck
Moderator
Moderator
In response to BenBeck

‎08-30-2018 11:25 AM

Should be there then as long as we are resolving the arp for that host. If another switch is the gateway for the host, we won't (or don't need) to keep track of it. 
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

alvis_douthit
New Contributor II
In response to BenBeck

‎08-30-2018 11:31 AM

Thank you

alvis_douthit
New Contributor II

‎08-30-2018 11:08 AM


Ben, It doesn't show everything in the arp table when I do a "sh arp" in 8030q.

netwizz
Contributor III

‎08-30-2018 11:45 AM

You might need to do a ping sweep first.  Sh Arp works fine in 08.00.30Q.  I just checked

scott_farrand_f
New Contributor III

‎08-31-2018 09:13 AM

Arp will not show anything if your management vlan isn't the client vlan.  If you're trying to hunt down a given device, it's a little more complicated, and you'd need to start from your routing switch/device.

Copyright © 2025 Khoros, LLC