CommScope RUCKUS Community Forums

vesalius · ‎02-11-2023

The default for Flooding of Unregistered IPv4 Multicast Frames changed from enabled to disabled between 8.0.95 and 9.0.*, and the documentation page title does not accurately reflect that change.

8.0.95 Disabling the Flooding of Unregistered IPv4 Multicast Frames in an IGMP-Snooping-Enabled VLAN
9.0.10 Disabling the Flooding of Unregistered IPv4 Multicast Frames in an IGMP-Snooping-Enabled VLAN
10.0.0 Enabling the Flooding of Unregistered IPv4 Multicast Frames in an IGMP-Snooping-Enabled VLAN

jijo_panangat · ‎02-13-2023

Hello @vesalius

Thank you for pointing that out. If I understand correctly, the change in the title is required for the 9010 guides as the 10.0 guide is reflecting the changes correctly. Pls, confirm.
We will get this verified and make the necessary changes to the multicast guide.

Thanks

Jijo panangat
Principal Tech Support Engineer
https://support.ruckuswireless.com/contact-us

View solution in original post

CommScope RUCKUS Community Forums

FastIron 09.0.10e Multicast documentation wrong