First off... Thanks
everybody who has been answering my questions about the ICX 7750 campus network
I inherited!
Been a great resource while I come up to speed on Ruckus.
Question is: My
campus switches have basically the below DSCP/LLDP Voice settings on all of
them.
lldp med network-policy application voice tagged vlan XXX priority
7 dscp 48 ports ethe 1/1/1 to 1/1/5 ethe 1/2/1
lldp run
The core 7750 stack they connect into & is also
connected to the PBX has no LLDP/DSCP settings.
That an issue? We do
have intermittent jitter... but not a lot.
Should I mirror the LLDP settings on the core or will a simple
“trust dscp” be sufficient?
Cheers!
