cancel
Showing results for 
Search instead for 
Did you mean: 

Console prompt

Jerry
New Contributor III

 

I was consoled into an ICX 7150 and everything was going fine.  Somehow, I did something and now my prompt is ~$.  How do I get back to the normal hostname prompt?

Thanks,

 

1 ACCEPTED SOLUTION

I'm not a 100% sure what happened there, but based on the screenshot it looks like the CLI task itself may have crashed. If you continue to have issues, please open a case (see my sig).

 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

View solution in original post

5 REPLIES 5

Jerry
New Contributor III

Here's what it looks like.

Jerry_0-1666722278245.png

 

BenBeck
Moderator
Moderator

If 'exit' does not work, you may need to restart the switch. 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

Jerry
New Contributor III

I figured as much.  It's just that I had done some configuring and hadn't saved it yet.

Does anyone know what mode that is and what it's used for?  I've never seen that before.

Jerry
New Contributor III

I ended up rebooting it.  Back to normal.