unleashed r310

[salvador_s_nche]

Hello good evening, my question is the steps to follow to change the firmware from the r310 model to stand alone mode to fimware unleashed and once I make the change to unleashed mode, I can manage my network from my cell phone and in the same way the steps to follow to register my ap, I would greatly appreciate your response, greetings

[h_ayoub]

Sanjay, thanks, but can you explain to me where i need to go and type those commands?

[h_ayoub]

To be clear also, I have been accessing the web UI.

[syamantakomer]

Hi Ayoub,

SSH into the AP using putty application or any terminal app, and then run the command.

Regards,
Syamantak Omer

[h_ayoub]

rkscli: fw show all

ipaddr:

file: R500_110.0.0.0.2005.bl7

size: 10985472

MD5 : CFE08D288A3A9C85212208506FF652F6

type: 0

local_file

-------------------------------------

current primary boot image is Image1

---------------

Magic:        RCKS

next_image:   0x130000

invalid:      0

hdr_len:      160

compression:  l7

load_address: 0x80080000

entry_point:  0x80307210

timestamp:    Tue Feb 25 20:35:58 2020

binl7_len:    10985312

hdr_version:  4

hdr_cksum:    0xFD08

version:      110.0.0.0.2005    ( 110.0.0.0.2005 )

MD5:          CFE08D288A3A9C85212208506FF652F6

product:      zf7752    (0)

architecture: 1

chipset:      3

board_type:   0

board_class:  3

customer:

Image Sign Type: Fully Signed Image(FSI).

---------------

Magic:        RCKS

next_image:   0x130000

invalid:      0

hdr_len:      160

compression:  l7

load_address: 0x80080000

entry_point:  0x8030B420

timestamp:    Wed Jun 13 13:02:24 2018

binl7_len:    23377756

hdr_version:  4

hdr_cksum:    0x71D5

version:      200.6.10.1.310    ( 200.6.10.1.310 )

MD5:          8ECDBC4FE1CBCC324F95D8958258B8AD

product:      zf7752    (0)

architecture: 1

chipset:      3

board_type:   0

board_class:  3

customer:

Image Sign Type: Intermediate Signed Image(ISI).

Tail start:   0x164af60

OK

rkscli:

[h_ayoub]

Thanks.  Just tried upgrading to R310_200.6.10.1.312 and it worked.  For some reason the 310 does not work.