throughput issue w/ ZF 7962

[christopher_sco]

I just stumbled on to a weird problem that's completely baffling me... I have a ZoneDirector 1000 controller and three ZoneFlex 7962 devices. One of the ZF 7962 is exhibiting very slow throughput - given that our office's connection is 100d/20u and that the other two ZF WAPs perform as expected when running speedtest.net, this third unit shows 15d/10u and I can't figure out why.

I've performed speed tests, via the ZoneDirector, to each of the units and they max out, so it doesn't appear to be a wiring issue. Even when I join my laptop to the WAP in question and I'm literally standing ten feet away from it, my performance speeds stink.

Any troubleshooting tips/recommendations?

[primoz_marinsek]

Hey Michael

Thanks for the answer

When you say that the client has rx_rssi of 18 you are talking about SNR right not some arbitrary number here?

And the tx_per is for packet error rate or something else? If it's so, what's the unit there and what number is an indication I need to check something?