cancel
Showing results for 
Search instead for 
Did you mean: 

r710 - very slow on 2.4ghz and 5ghz

Ed-E
New Contributor

Hi all,

I have a r710 on latest firmware 200.13.6.1.319 and I only getting 70Mbps on 5ghz and my internet speed is 1gig. Any ideas? I have hard wire tested from the cable modem to the ethernet plugged into the AP. Thanks!

1 ACCEPTED SOLUTION

sanjay_kumar
RUCKUS Team Member

Hi @Ed-E 
The client is having a bad signal quality -68 and MCS rate is 2. I see that the client is tested by placing right next to it, can you tell us how the AP is placed? Is it mounted on the sealing or place on the bench?

Are you seeing the same RSSI with APs on other rooms as well?

View solution in original post

4 REPLIES 4

Ed-E
New Contributor

Additional info - 

The wireless test was conducted right next to the ap and other rooms. 

EdE_0-1676919754406.png

 

sanjay_kumar
RUCKUS Team Member

Hi @Ed-E 
The client is having a bad signal quality -68 and MCS rate is 2. I see that the client is tested by placing right next to it, can you tell us how the AP is placed? Is it mounted on the sealing or place on the bench?

Are you seeing the same RSSI with APs on other rooms as well?

Hi @sanjay_kumar,

Thanks for the response. The AP is placed on top of the fire place mantel, so 5 feet off the floor with rounded side face up. Here are some more tests.

Macbook pro 2019 - 7 feet away from ap. I changed the AP to be veritcal with the rounded side facing the interior of the home and the results are better.

 

rssi -42

noise -92

tx rate 975Mbps

Macs 7

nss3

Is there another ap placement you would recommended? 

 

Squozen
Contributor II

On the ceiling, that's how they're designed.