cannot authenticate or get DHCP address

[sparkis_greenbr]

New to Ruckus. Want to simply thorw a static IP on ruckus ap. Have Ruckus AP give out DHCP to clients on single wireless network. Route traffic through Ethernet 2 to firewall. 

Internet - assigned static ip w/ gateway IP as firewall
Local Subnet 1 - assigned static ip (same subnet as Internet) and enabled DHCP server Access VLAN 1
Radio 2G - configured Wireless. Packet Forward - Bridge to WAN
Ethernet Port2 - Enabled Access Port, Bridge to WAN Vlan1

Can someone please point me in the right direction as to what I am doing wrong. I cannot get the Wireless to provide a DHCP address - 

I can also give out DHCP addresses from Firewall. If I do that do I only need to configure Radio and Ethernet Port 2?

Thank you in advance

SJMP

[sparkis_greenbr]

Since I cannot get DHCP to flow from AP to client  -

What changes should I make on AP so that clients connect and get DHCP from my Firewall?

Change Packet Forward on Radio to Bridge to LAN? and disable local subnet?

[monnat_systems]

Change Packet Forward on Radio to Bridge to LAN? and disable local subnet? --> Yes...

[monnat_systems]

this is getting lil tricky...dropped me an email at monnat@outlook.in