cancel
Showing results for 
Search instead for 
Did you mean: 

cannot authenticate or get DHCP address

sparkis_greenbr
New Contributor III
New to Ruckus. Want to simply thorw a static IP on ruckus ap. Have Ruckus AP give out DHCP to clients on single wireless network. Route traffic through Ethernet 2 to firewall. 

Internet - assigned static ip w/ gateway IP as firewall
Local Subnet 1 - assigned static ip (same subnet as Internet) and enabled DHCP server Access VLAN 1
Radio 2G - configured Wireless. Packet Forward - Bridge to WAN
Ethernet Port2 - Enabled Access Port, Bridge to WAN Vlan1

Can someone please point me in the right direction as to what I am doing wrong. I cannot get the Wireless to provide a DHCP address - 

I can also give out DHCP addresses from Firewall. If I do that do I only need to configure Radio and Ethernet Port 2?

Thank you in advance

SJMP
47 REPLIES 47

Since I cannot get DHCP to flow from AP to client  -

What changes should I make on AP so that clients connect and get DHCP from my Firewall?

Change Packet Forward on Radio to Bridge to LAN? and disable local subnet?

Change Packet Forward on Radio to Bridge to LAN? and disable local subnet? --> Yes...

this is getting lil tricky...dropped me an email at monnat@outlook.in