RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Ethernet port speed negotiation

Kicking the tires on a 7982 running 9.4 firmware. Hooked the WAP up to a Netgear GSM712 switch, but on gig-speeds both the switch and the WAP show the port down. In fact, the only way I could get it to talk to the switch was at 100/half, which is r...

EOL announcements for ZF2942 and ZF2741

https://support.ruckuswireless.com/pr...

ZF7762 and other brands repeaters

We installed a ZF7762 at a client's residence and everything works fine. When you connect to the wlan (test purpose wlan, no authentication) your client correctly gets an IP address from DHCP, gateway and DNS server. Now the client wants to extend th...

Will two zoneflex aps serving the same ssid on the same wired network without a zone director interfere with each other?

I know using a zone director for my two zoneflex 7982 APs will get me smartmesh support which is super and great, but can I avoid the expense without causing AP contention issues for clients in the small area served by both APs? I don't feel like ju...

Does the standalone 7982 AP support configuring via config file (ala Cisco APs)

Currently evaluating Ruckus 7900 series AP for our Bingo application used by 100's of Bingo Halls. Currently using Cisco AP's where we can configure a model and send the config file to the location to be uploaded, thus eliminating the need for conf...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

3

1

1

1

1