RUCKUS Indoor and Outdoor Access Points (APs)

Ruckus Wireless

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

ZD3000 and R700 limits at a large public event

I am planning to supply WiFi for a large public event, about 10000 people present. I estimate that at least half will connect and use the WiFi service, this event will be hosted in a remote area and I only expect small amounts of interference, also t...

After a software upgrade to version 9.8.2.0 build 24 the first 10-15 minutes all R700 dual band AP's on the 5 Ghz band select channel 100

After a software upgrade to version 9.8.2.0 build 24 the first 10-15 minutes all R700 dual band AP's on the 5 Ghz band select channel 100 channelfly enabled,2.4 Ghz band are spread ok (channel 1,3,6,11 for example) from the beginning.So the first 15 ...

iPad Air (iOS 8.1 en newer) will only connect on 5GHz

For an event we have 280 iPads Air, running iOS 8.3 (latest version today). WiFi setup: ZD1100 running 9.8.2, 2x 7782-S. Security: WPA2/AES. We notice that all iPads are only connecting to the 5GHz, not even 1 to the 2.4Ghz. Resulting in to few capac...

7731 RB -NBR Problem

I am trying to setup a link with a Root Bridge to a Non Root bridge. Once I choose a channel I am getting a good link. The Up/Down is 10/9 and RSSI is 39/36. From my understanding this is a descent link. However when I run the SpeedFlex test I am loo...

All SSID's are broadcast but I just want the local SSID's visable at the current location

All SSID's are broadcast but I just want the local SSID's visable at the current location. We have 5 locations, each location will have a user and guest SSID, we want only the local SSID to be visible at each location. Maybe I am just missing some...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1

1