RUCKUS Indoor and Outdoor Access Points (APs)

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

ZF7055 One port connected, two ports UP

Something strange with my zf7055. I have PORT 5 (POE connected of the ZF7055 to the POE switch. However, in the device status, PORT 4 shows as UP, but there is nothing connected to PORT 4:Port Interface 802.1X Logical Link Physical Link Labe...

Can Application recognition and control feature work without ZD on R700?

Can an R700 perform Application recognition if the controller is temporarily not available in the network? Is this feature fully supported on R700 or it does requires controller to be in place?

Speedflex Question - Huge Gap between Up- and Download

Hello,recently i was on Customer Site to check wireless throughput with Speedflex.After testing some iPhones i tried to check a Windows 7 PC connected over 802.11ac.Speedflex Tool reported me a Download Speed about 180Mbit/s and an Upload about 39Mbi...

Default settings for ipv6 caused me a problem I just discovered

Has anyone else experienced this? By default my ZD1106 has ipv6 disabled which is what I want in my environment. However also by default the system default AP group configures all AP's to use ipv4 and ipv6. I always thought since it was disabled on ...

Can you do 2.4Ghz only on one SSID and another SSID on 5.8Ghz only?

I'm using a ZoneDirector 1200 with a R710, R700 and a T300 at one site. The customer is using 5.8g only for access and it is working great. I wanted to create a second SSID on 2.4g for guests and 2.4g only devices but I do not want the second SSID to...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

Forum Posts

ZF7055 One port connected, two ports UP

Can Application recognition and control feature work without ZD on R700?

Speedflex Question - Huge Gap between Up- and Download

Default settings for ipv6 caused me a problem I just discovered

Can you do 2.4Ghz only on one SSID and another SSID on 5.8Ghz only?

Welcome to RUCKUS Community!

Lennar SmartHome Customers

Related Self-Help

Web upgrade for R770 not working

DNS Requests to baidu.com from Unleashed AP.

unable to connect R650 to ZD1200

Reprogramming Ruckus H350 Access Points version 90...

R720 slow speed issue, under 100Mbit, Unleashed ve...

Where to find R560 Standalone Firmware?

R500 failed to logon despite has been RESET

upgrade firmware ZF 7055

R510 default login isn't wotking

R700 firmware upgrade