on initial setup of SZ100:1 port groupIP address 192.168.1.101subnet 255.255.255.0Gateway 192.168.1.1 (DSL Internet Modem)Primary DNS 8.8.8.8Secondary DNS 192.168.1.1 AP connected to port 2 of SZ100:Ip address 192.168.1.50subnet 255.255.255.0Gateway ...
Hi everyone,I'm done configuring an R700 AP as a standalone AP but I always get a different address - 169.254.27.89 with subnet mask of 255.255.0.0 - on my test phone from the configured pool of addresses.The attached photos are the configurations on...
We've got a silly problem but one folks have probably overcome easily. We want to ceiling mount a couple of R700 APs on a drop ceiling but the Tbars aren't the typical flat tbars that the standard clips will work with. The bars are skinny with a sl...
Hi I was confused, for tx power option in the configuration p300, only full, and -1dbm, and others, what the purpose of the "full" country code United states (default), please helpthank'sAldy
Is anyone aware of an ETA for the 710's to get meshing? We've picked up a few to test with and put in places where the 600's are a little weak and one thing we'd like to try is meshing with them since the better antenna;s mean we'll get better range/...
