Will R500/R600 support meshing?

[john_d]

I've noticed that SmartMesh support is curiously lacking from the R500/R600 data sheets. Am I reading too far between the lines that unlike the T300's and R700's, the R500/R600 will not support meshing?

[abiola_james]

Please can someone confirm that vSZ 3.1.1 does not support mesh on R710. My AP has always been in the mesh disabled state

[david_henderson]

I was told that the R710 will not get mesh support until vSZ 3.5 ships which is sometime this summer. 

[john_d]

https://support.ruckuswireless.com/answers/000004122

The support article might be a bit dated -- claims vSZ 3.2 and ZoneFlex 10.0.

[abiola_james]

Thank you John, the link is exactly what i wanted. but it is Zonedirector 10.0 and not Zoneflex

[john_d]

Ruckus marketing is confusing. The ZD firmware is sometimes called ZoneDirector and other times called ZoneFlex, and sometimes even called SmartOS though they seemed to have given up on that moreso than the other names 😉