cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus r610- How to set trusted or permitted ip address to access the management unleashed portal

luqman_hakim_ma
New Contributor
Hi Support, can we configure the trusted or only permitted ip address to access the management portal for unleashed access point. 
2 REPLIES 2

albert_pierson
RUCKUS Team Member
Hi Hakim,

That feature is only configurable via the Unleashed CLI and not via GUI

Please refer to this document:
https://support.ruckuswireless.com/documents/2595-ruckus-unleashed-200-7-ga-cli-reference-guide

On page 229:

Management Access Control List Commands

Use the following commands to create or configure management ACLs and enter the config-sys-mgmt-acl or configsys-mgmt-acl-ipv6 contexts. These commands must be used from the config-sys context.


mgmt-acl To create or configure a management ACL, use the following command: mgmt-acl WORD


Example

ruckus(config-sys)# mgmt-acl macl1
The management ACL 'macl1' has been created. To save the Management ACL, type 'end' or 'exit'. ruckus(config-mgmt-acl)#


I hope this answers your question,

Thanks for selecting Ruckus Networks - a Commscope company.

luqman_hakim_ma
New Contributor
Hi Albert, thanks for your help.