Hi Oscar,
"rkscli" is the name of the CLI prompt, it is not a command.
To start the captures over the radio, please refer below commands.
For 5 G OTA
- set capture wifi1 stream
(start)- set capture wifi1 idle
(stop)
For 2.4 G OTA
- set capture wifi0 stream
(start)- set capture wifi0 idle
(stop)Regards,
Syamantak Omer
Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn