R510 Network Slow Speeds averaging 30-50 Mbps

[david_fry_jz089]

Hello,
I have 3 R510's in my home.  1 for each floor, ceiling mounted and placed central to each floor.   None of the clients on our network can ever achieve more than 50Mbps.   My PC which is 15ft around a slight corner from the AP got 30 Mbps down and 80Mbps up on an AP to Client speed test.

I am fairly technical, but Wi-Fi AP's is not my specialty.   I found this great thread where changing the setting from "performance" to "compatibility" helped tremendously.
https://forums.ruckuswireless.com/ruckuswireless/topics/settings-to-maximize-performance-2-x-r610-ru...

I don't see anything like that.

I have 1GB cable modem, and am about to change my network to a Dual Wan 1Gb Fiber Connection + a 200Mbps Cable connection.  But none of this does any good if the clients are stuck at 30Mbps.

Any thoughts on how to optimize this network?

Thanks

[david_fry_jz089]

There is 1 interface on the system:

    Name                   : Wi-Fi 2
    Description            : ASUS USB-N53 802.11a/b/g/n Network Adapter
    GUID                   : b9a77ae2-4570-4b70-9a78-1fe3dc2a97f9
    Physical address       : f0:79:59:74:c2:9b
    State                  : connected
    SSID                   : Bela_r510
    BSSID                  : 90:3a:72:08:31:f8
    Network type           : Infrastructure
    Radio type             : 802.11n
    Authentication         : WPA2-Personal
    Cipher                 : CCMP
    Connection mode        : Auto Connect
    Channel                : 11
    Receive rate (Mbps)    : 600
    Transmit rate (Mbps)   : 144
    Signal                 : 100%
    Profile                : Bela_r510

    Hosted network status  : Not available

[andrew_giancol1]

This one is tough, if this was my install, I would from here, I would switch to a different client, I can see you're on 2.4ghz, so the 40mb/s on a single channel seems about as fast as the standard would see. Plus or minus a few mb/s. Can you disable 2.4ghz on your AP and re-test with the same client? 

[david_fry_jz089]

Well 50mbps would be acceptible on 2.4ghz 802.11g or older, but I'm using 802.11n which should support 300mbps.    I'll try disabling 2.4 see what happens

[andrew_giancol1]

 I've never ever seen close to that on a single channel but my experience is my own. interested to see your results.

[david_fry_jz089]

I have a feeling you are right.  Without channel bonding, I think maybe 2.4ghz max is right around my current speed.    Let's see what 5ghz does