cancel
Showing results for 
Search instead for 
Did you mean: 

P300 setting

katsumi_seki
New Contributor II
I am using P300 now. Ruckus recommends using the default setting if you don't use special reason. My question is that if the distance is within 1km for each device, which should I use a 3km setting following the recommendation or 1km?
1 REPLY 1

syamantakomer
Community Admin
Community Admin
Hi Kat,

As you have mentioned "distance is within 1km for each device" I would suggest using 1km, not 3. If distance is beyond 1km then choose the higher value.

Regards,
Syamantak Omer

Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn