Not enough electricity power provided with AP warning ?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-22-2020 02:51 AM
After upgrading to Unleashed 200.8, my PoE switch powered R610 showing "Not enough electricity power" warning ? I am sure my PoE switch can provide both 802.3af and 802.3at power output and my R610 works well with both 2.4Ghz and 5Ghz SSID running. any idea ?
39 REPLIES 39
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-13-2021 02:20 PM
I had the same problem, switching from auto to 802.3at also solved it for me. Good candidate for a bug fix or at least a remark in the documentation.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-22-2020 06:40 AM
I just found out the solution that is to force AP PoE operation mode from "Auto" to "802.3at PoE" and reboot AP. I still don't know why the AP can't detect itself. bug? PoE switch compatibility ? Hmm...
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-22-2020 11:11 AM
Hi George,
PoE Switches negotiate PoE power after identifying other end devices such as AP, Cameras using LLDP-MED.
if you are using ICX Switches:
By default, LLDP is disabled in ICX 7450 switch. To enable it, the following global command has to be issued:
The switch will have to advertise power via LLDP and the following commands have to be issued either for the specific port e.g. port 1/1/5,
or if all ports have to be configured identically
Also verify on Ruckus Unleashed AP if LLDP enabled
If not enabled
HTH
Thanks
Karthik
Thanks
Karthik.
PoE Switches negotiate PoE power after identifying other end devices such as AP, Cameras using LLDP-MED.
if you are using ICX Switches:
By default, LLDP is disabled in ICX 7450 switch. To enable it, the following global command has to be issued:
ICX7450-48P Router(config)#lldp run
The switch will have to advertise power via LLDP and the following commands have to be issued either for the specific port e.g. port 1/1/5,
ICX7450-48P Router(config-if-e1000-1/1/5)#lldp advertise power-via-mdi ports ethernet 1/1/5
or if all ports have to be configured identically
ICX7450-48P Router(config-if-e1000-1/1/5)#lldp advertise power-via-mdi ports all
Also verify on Ruckus Unleashed AP if LLDP enabled
ruckus# show ap mac
If not enabled
ruckus(config-ap)# lldp enable
HTH
Thanks
Karthik
Thanks
Karthik.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-22-2020 02:16 PM
Same story.
I have several R710 and R610 in my house
My POE+ 802.11at switches are Netgear gs108epp and Zyxel GS1200-8pV2.
Both supports 802.11at, but my ruckus AP connects only at 802.11af with limited perfomance
Q: Is it possible to managed my switch/ruckus to work correctly?
If not -what is the best price recommended switch with 8 ethernet + minimum 2 POE out to work with ruckus?
I have several R710 and R610 in my house
My POE+ 802.11at switches are Netgear gs108epp and Zyxel GS1200-8pV2.
Both supports 802.11at, but my ruckus AP connects only at 802.11af with limited perfomance
Q: Is it possible to managed my switch/ruckus to work correctly?
If not -what is the best price recommended switch with 8 ethernet + minimum 2 POE out to work with ruckus?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-22-2020 03:24 PM
o! I found a solution - just manually set to every AP mode to 802.11at.
The only issue that group policy not working in this case - only one by one...
The only issue that group policy not working in this case - only one by one...
![](/skins/images/9005211F6EA5B4426010DF12A800E799/responsive_peak/images/icon_anonymous_message.png)
![](/skins/images/9005211F6EA5B4426010DF12A800E799/responsive_peak/images/icon_anonymous_message.png)