We use only 2.4 GHz because of the connectivity with the devices (mobile phones that have only 2.4GHz) and the design of our system...
Ruckus 7372 is connected to our pc via 1gbps lan and we do file transfer to phones connected to the 7372.
We cannot change wifi operation mode from 802.11 b/g/n to n-only, because we do not want 802.11 b/g mode as an option.
There is no other noise from other wifi AP devices the wifi spectrum is clean.
We connect only one device and start file transfer, in ruckus statistic page for connected devices we see a rise in errors and then device is going back to b and g mode and that’s why we have speed degradation.
With 2 or more devices it’s much worse situation.
We tried with different devices same result.
Upgraded fw to 220.127.116.11.15 it did not help.
Manual channel select still the same result.
How can we set n-only mode in 7372 without controller?
On Ubiquity Unifi AP we don’t have this kind of problems because we are able to set n mode only.