cancel
Showing results for 
Search instead for 
Did you mean: 

Auto Cell Sizing between R510 and R720

nikita_kulikov
New Contributor III
I test Auto Cell Sizing between R510 and R720. They are both controlled by vSZ 5.0.0.0.675.
On controller I see that R510 and R720 are neibghours. But in console each AP there isn't similar entries. Will Auto Cell Sizing work properly in this situation? How can I check ACS's work?
Image_ images_messages_5f91c3f6135b77e2478fdeee_f365b13b75ef397f47a277aa053e10aa_RackMultipart2018120699902pht0-a90ea100-85c7-4453-8132-fc131f9c8d6a-512136150.png1544105715
0 REPLIES 0