02-07-2023 01:30 PM
Hi all,
We have R310 AP's with a Zonedirector 1200. Recently we started noticing short break ups in the Wifi connectivity many times a day. When looking at the log of an AP I can see a lot of the following lines:
Feb 7 20:16:31 RAP11 user.warn kernel: ieee80211_send_probereq: chan=11, v54_ie2_size=15
Feb 7 20:16:31 RAP11 user.warn kernel: ieee80211_send_probereq: chan=11, v54_ie2_size=15
Feb 7 20:16:31 RAP11 user.warn kernel: ieee80211_send_probereq: chan=11, v54_ie2_size=15
Feb 7 20:16:31 RAP11 user.warn kernel: ieee80211_send_probereq: chan=11, v54_ie2_size=15
Feb 7 20:16:31 RAP11 user.warn kernel: ieee80211_send_probereq: chan=11, v54_ie2_size=15
Feb 7 20:16:31 RAP11 user.warn kernel: ieee80211_send_probereq: chan=11, v54_ie2_size=15
Feb 7 20:16:31 RAP11 user.warn kernel: ieee80211_send_probereq: chan=11, v54_ie2_size=15
Feb 7 20:16:51 RAP11 user.warn kernel: ieee80211_send_probereq: chan=1, v54_ie2_size=15
Feb 7 20:16:51 RAP11 user.warn kernel: ieee80211_send_probereq: chan=1, v54_ie2_size=15
Feb 7 20:16:51 RAP11 user.warn kernel: ieee80211_send_probereq: chan=1, v54_ie2_size=15
Feb 7 20:16:51 RAP11 user.warn kernel: ieee80211_send_probereq: chan=1, v54_ie2_size=15
Feb 7 20:16:51 RAP11 user.warn kernel: ieee80211_send_probereq: chan=1, v54_ie2_size=15
Feb 7 20:16:51 RAP11 user.warn kernel: ieee80211_send_probereq: chan=1, v54_ie2_size=15
Feb 7 20:16:51 RAP11 user.warn kernel: ieee80211_send_probereq: chan=1, v54_ie2_size=15
Feb 7 20:16:51 RAP11 user.warn kernel: ieee80211_send_probereq: chan=1, v54_ie2_size=15
They are usual preced by user.debug kernel: Neighbour found.
and end a bit later with
user.debug kernel: Route found: xmitdev=br0
As you can see, they are grouped together on the same time (2 groups in this example). I am wondering if this has anything to do with the signal breaking up, and if it is, how it can be fixed? I can't seem the find much documentation on this.
Can anyone help me figuring this one out?
Thanks
Frederic
Solved! Go to Solution.
02-07-2023 10:27 PM
Hello Fredric,
Please check the channelfly setting. For next, I would suggest to check the OTA capture; if you have macbook you may turn on the monitor mode with the wireshark to check what is going on in the 2.4G medium. If you need to debug more, please log a tac case with us and we can have a debug session with you.
Thanks,
Dickson