CommScope RUCKUS Community Forums

james_anderson1 · 02-21-2014

I am unable to POE any recent model ruckus APs with a PowerDsine 9524 (this is a newer model midspan). They will power up with a PowerDsine 9024. The 9524 has no issue powering other POE devices or older model ruckus APs. I've tried over 5 differe...

james_anderson1 · 12-18-2020

Understanding the logical workflow of authentication in a WISPr portal will help you get it working.... 1. Client connects to WISPr WLAN unauthenticated. Client is only allowed the whitelist. Client gets redirected to the webpage by the SZ. The SZ...

james_anderson1 · 10-18-2019

To remove the access point from the mounting posts, look for a small hole in the side of the access point to insert a paperclip. The paperclip will release a spring loaded catch mechanism. While pressing the paperclip into the hole to release the c...

james_anderson1 · 09-27-2019

The client gets to decide which AP they wish to connect to if both APs are broadcasting the same SSID (wireless name). If you wish to have the Apple TV connect to a specific AP, then have that AP broadcast a unique SSID. A Ruckus AP is capable of b...

james_anderson1 · 02-21-2018

It does work but you do have to configure the syntax like an LDAP query in vbscript. There is one issue if you're trying to do the authentication through the webservice: The APs attempt to use chap authentication and you have to tell them all to us...

james_anderson1 · 02-21-2018

Is the AP getting and IP address? Blinking green power followed by reboots says it isn't. If the AP is in the same subnet as the controller, it doesn't even need the option (will find the controller via broadcast). If that's not happening, check t...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Unable to power recent model APs with newer model PowerDsine 9524

Re: Working Wispr portal example

Re: Ruckus r510 range improvement for dummies?

Re: Ruckus r510 range improvement for dummies?

Re: AD authentication on virtual smartzone

Re: Smart Zone New installation - zoneflex r500 not connecting.