cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to power recent model APs with newer model PowerDsine 9524

james_anderson1
New Contributor II
I am unable to POE any recent model ruckus APs with a PowerDsine 9524 (this is a newer model midspan). They will power up with a PowerDsine 9024. The 9524 has no issue powering other POE devices or older model ruckus APs. I've tried over 5 different current models of AP's with no success. The PowerDsine 9524 is in a default configuration. Any suggestions?
3 REPLIES 3

keith_redfield
Valued Contributor II
James, I've opened a case for you off this post. A support engineer should be contacting you shortly.

james_anderson1
New Contributor II
Two of the newer AP's were zoneflex 7372 & 7363. The older model was a 7962 (dome style).

Change to PowerDsine 9564 default status has powered up the newer AP's. Specific change was System Configuration - Product Parameters: System Detection Method (PD Detection Method) changed from 'IEEE802.3af + IEEE802.3at' to 'IEEE802.3af + IEEE802.3at + Legacy'.

At least now I can power up the AP's.

keith_redfield
Valued Contributor II
James, thanks for the update. We're looking into whether this is expected behavior or not, but your information will certainly help other customers, so much appreciated!
Labels