CommScope RUCKUS Community Forums

vernon_wasile · 10-18-2020

We have connected 3 x controllers to our SCI:1. VSZ Site 12. VSZ Site 23. SCG200One of the VSZs' access points showing "unknown" with no data displayed.Has anyone faced this same issue?**The two VSZ are from the same VM server - could this be an issu...

vernon_wasile · 11-18-2015

I am stuck with an installation that needs the following:2 x separate SSIDs broadcasting two different VLANs (VLAN 550 and VLAN 1241).Traffic to be passed through a DSLAM (using 2 x PVCs configured on it).ADSL2+ modem at customer side (configured wit...

vernon_wasile · 03-10-2015

Currently facing issues with our mesh AP's not more than 100m away.ZF7782 getting up link from 7782-S and was working when first installed until a week ago. Mesh AP connected to AC power when switched off and on again does not pick up the 5GHz up lin...

vernon_wasile · 03-23-2015

I've managed to bring the AP's back online. Issue was that Root AP's were configured as AUTO MESH.Once the root AP's were configured as Root AP's and not AUTO; the mesh AP's went back online.The mesh AP's are less than 100m away from the Root AP's.Al...

vernon_wasile · 03-10-2015

Any ideas how meshed AP's are out-of-sync?I have a ZF7782 feeding off of a ZF7782-S that's not more than 100m away and clear line of sight.Worked when we first installed it but now it can't pick the uplink even though 5GHz is working from ZF7782-S.ZF...

CommScope RUCKUS Community Forums

User Statistics

User Activity

SCI - Access Points from our VSZ are showing "Unknown" data

VLAN-per-SSID tagging SCG200

ZF7782 AP not picking uplink from ZF7782-S <100m away

Re: ZF7782 AP not picking uplink from ZF7782-S <100m away

Re: Manually Configure Mesh on AP