I manage a ZD3050 with 100 ZF7372. Obviously it's the end of the line. The support and offering from vendors has been less than ideal. Every vendor seem to prefer to sell one manufacturer over the other based on their incentive.I would like to find o...
This is most likely a DNS issue. The client connecting to the guest network has to be able to find the controller's address at its internal address, not external. Nothing special has to be done if the client is connected to the same network as the co...
Looking at the diagram a little better, I think you expected the AP to send the traffic to the DHCP server via their management network. I think this is only possible if you tunnel all the traffic. I wouldn't do that. I would use a local DHCP server.
Ok. When a client computer connects to a network (wifi or wired), it sends out a DHCP request packet. This is a broadcast packet on a Layer 2 network. This means that the DHCP server will only receive the packet if the server and client are on the sa...
For the DHCP request packets to reach the DHCP server, the branch routers have to have forwarders setup on the client VLAN, to forward the packet to the DHCP server.
I had this experience. The vendor "forgot" to add the extra 50 licenses into the ZD. When we provisioned AP number 51, it simply did not work. I suspect only 50 APs will work.It gets worse... the license is model specific. So if you get replacements ...
