CommScope RUCKUS Community Forums

GregNI · 12-01-2022

With the release of Version 10 of the ICX firmware for the 7550 and above, the picture has become confusing. The version 10 release notes says "Release 10.0.00 and future releases do not support ICX 7150, ICX 7250, or ICX 7450 devices. These devices ...

GregNI · 01-15-2022

I have just upgraded my ICX-7150 stack to release 09.00.10 from 8.0.95d and the Web interface has disappeared. If I do an nmap scan neither of the ports is open 80 or 443. Any ideas for things to check? Can I force the servers to start manually? ...

GregNI · 08-20-2020

I am looking for any pointers to get the absolute maximum performance and smooth roaming on a small network in a setting with low ceilings and thick walls (which I cannot put wiring in to). I have read all the documentation I can find, but hearing fr...

GregNI · 01-17-2022

Thanks for the pointer. The steps which worked for me were: 1. Cleared the IP address associated with the VE for the VLAN I am using 2. Added a different IP address to a loopback interface 3. Tried to connect a browser to the loopback address whic...

GregNI · 01-16-2022

Thanks for your reply. Case opened.  I have a standalone 7250 and it works fine. It's all a bit odd. Thanks.

GregNI · 12-14-2020

I can recommend making them in to a stack. They are then just managed as a single switch so you do not have to manage trunks.

GregNI · 11-23-2020

Yes. I currently have a printer plugged into the other port and it works fine.

GregNI · 08-20-2020

Thanks for many great ideas. I will try them and see how I get on.I assume the static channel is different for each AP to avoid co-channel interference and that the meshing system can cope with that?

CommScope RUCKUS Community Forums

User Statistics

User Activity

What's happening with ICX 7150 Firmware?

ICX-7150 9.00.10 Web Service

R510, R610 and R710 Maximum Performance

Re: ICX-7150 9.00.10 Web Service

Re: ICX-7150 9.00.10 Web Service

Re: How to config the trunk port between 2 ICX 7150 switches for pinging through same vlan id and the configuration commands

Re: Can you use the R510 as a switch?

Re: R510, R610 and R710 Maximum Performance