CommScope RUCKUS Community Forums

gary_avalos · 07-31-2019

I have the following problem with the R510. I put firmware R510_200.7.10.102.64.bl7 and at the time of entering the Master this error comes out:Building the Unleashed Network. It may take a few minutes.I entered by ssh and I did a get director and I ...

gary_avalos · 12-08-2016

Good afternoon,I have a zonedirector ZD 1106 version 9.10.2.0 build 11, the APs that are connected are the r500 / r600 / zf7372.I would like to be able to work with several SSIDs and be able to define which band to work on.I do not know how to do tha...

gary_avalos · 07-31-2019

Yes, I tell you that if I leave it without connecting to the Master it works without problem. But when you join the master you get this error: Building the Unleashed Network. It may take a few minutes.

gary_avalos · 12-09-2016

ThanksThat is clear to me.But I just see that you can assign a group by frequency.Can you have the AP in several Access Point Groups?Regards,

gary_avalos · 12-09-2016

Thank you,Ok I can use a WLAN for 2.4GHz and another WLAN for 5.8GHz for the Access Point Group.But will it be that I can use a WLAN for 2.4GHz and another WLAN with 2.4GHz and 5.8GHz.regards

gary_avalos · 12-09-2016

I do not know how to do it in WLAN Groups, I have seen that this can be changed in Access Point GroupsI would like to have something like thatAP1 -> 2.4GHz -> WLAN1 -> Acces Point Groups 1AP1 -> 5.8GHz -> WLAN2 -> Acces Point Groups 2Regards,

gary_avalos · 12-09-2016

Can an AP be in different WLAN Groups?AP1 -> WLAN1 GroupAP1 -> WLAN2 GroupRegards,

CommScope RUCKUS Community Forums

User Statistics

User Activity

R510 - Building the Unleashed Network. It may take a few minutes.

Multiple Bands / Multiple SSID

Re: R510 - Building the Unleashed Network. It may take a few minutes.

Re: Multiple Bands / Multiple SSID

Re: Multiple Bands / Multiple SSID

Re: Multiple Bands / Multiple SSID

Re: Multiple Bands / Multiple SSID