Showing results for 
Search instead for 
Did you mean: 

Multiple Bands / Multiple SSID

New Contributor II
Good afternoon,

I have a zonedirector ZD 1106 version build 11, the APs that are connected are the r500 / r600 / zf7372.

I would like to be able to work with several SSIDs and be able to define which band to work on.

I do not know how to do that.


Image_ images_messages_5f91c466135b77e247a628a2_72422c3ac0242ddf8eef5b0dd6120df4_RackMultipart20161209103291p4r-4c5d75ab-9792-41c1-9bde-dc0b7bc981e0-1103574804.JPG1481295234

It can be done per AP or per AP group.  AP group show in the attached image.

I do not know how to do it in WLAN Groups, I have seen that this can be changed in Access Point Groups

I would like to have something like that

AP1 -> 2.4GHz -> WLAN1 -> Acces Point Groups 1
AP1 -> 5.8GHz -> WLAN2 -> Acces Point Groups 2


Apologies, the above is actually in the system default AP group, using two different WLAN groups.  I misspoke on the above.

Thank you,

Ok I can use a WLAN for 2.4GHz and another WLAN for 5.8GHz for the Access Point Group.

But will it be that I can use a WLAN for 2.4GHz and another WLAN with 2.4GHz and 5.8GHz.


The way you would do this is make Group1 for 2.4 with WLAN1, andGroup2 with WLAN1 and WLAN2.  Assign 2.4GHz to Group1 in the AP group, and 5GHz to Group2.