You probably need to statically assign yourself a wired connection to the AP on 192.168.0.1/24I wouldn't bother trying to set up Ruckus AP via wifi.Once you have wired access, set up the config as needed and then drop off and reconnect via wifi.
Yeah, per the above comment, the ZD in redundancy should always have an option for manual failover. They swap pretty quick anyways, so you could always pull the primary and everything would come up really quick on the secondary. .
Are they all the same type etc ? It may be something as simple as, older models may no longer work on that firmware.Alternatively I have run into cases where the APs drop, they're pingable, however I can usually SSH into them and you may just need t...
If there is no "last seen" date, then the AP has either never connected to the controller, or maybe you've made firmware/backup changes since the AP was down.
