Commscope

chbane_mohamed · 04-19-2018

i have 11 APs connected by mesh and this APs are installed in a machines, these machines move, the problème is when the machine move i have a long drop of ping

chbane_mohamed · 03-25-2018

chbane_mohamed · 01-28-2018

chbane_mohamed · 10-04-2017

I have a new access point, the problem is that the access point does not communicate with the zonedirector even if the uid dir does not blink

chbane_mohamed · 07-10-2017

chbane_mohamed · 05-04-2021

can you check the vlan port configure on the switch and also on the zonedirector port

chbane_mohamed · 05-04-2021

can you check the vlan port configure on the switch and also on the zonedirector port

chbane_mohamed · 06-19-2018

This one port should be trunk

chbane_mohamed · 06-18-2018

Yes it's possible, just the port of the access point should be trunk

chbane_mohamed · 10-05-2017

ok thanks, i already open a case,

Commscope

User Statistics

User Activity

drope of ping

uplaod a licence support of samrtzone 100

i can't connect to the ap by ssh

how to disable the autonomous operation of an access point

ap t301s don't communicate with zd1200

Re: ZD1200 not connecting to network after FW upgrade.

Re: ZD1200 not connecting to network after FW upgrade.

Re: one AP with 3 SSID and 3 subnet

Re: one AP with 3 SSID and 3 subnet

Re: how to disable the autonomous operation of an access point