Port Fast is a vendors proprietary method of putting a port into forwarding mode immediately without going through listening\learning\blocking\forwarding.....when a switch is in 802.1d mode. 802.1w introduced that feature with the standard. Regardles...
http://docs.ruckuswireless.com/fastiron/08.0.70/fastiron-08070-l2guide/GUID-D6EE146A-2D8B-4274-B091-...For all all properly configured bridges.....and all associated inter-switch links.....we have the spanning tree.....rooted. The core of the network...
You configure Root guard at the edge of the network......so as to not have any switch converge to a new root bridge.....if you have a multiple hop network at L2 from edge to core...........why would you allow L2 bridges at any layer converge to a new...
The BPDU guard, an enhancement to STP, removes a node that reflects BPDUs back in the network. It enforces the STP domain borders and keeps the active topology predictable by not allowing any network devices behind a BPDU guard-enabled port to partic...
Michael,Need to get on a call right now.....you most likely have LACP block issue....http://docs.ruckuswireless.com/fastiron/08.0.70/fastiron-08070-l2guide/GUID-35DFAD56-2479-4FA1-A448-...Check this out...make sure you meat all criteria for LAG forma...
