When I add a second port to a existing LAG it is immediately disabled, why?

[michael_ridenou]

Link aggregation issue 

Everything appears to be correctly configured for some reason upon addition of the secondary port to the LAG it disables. I have tried everything short of completely eliminating the lag and reconfiguration but would like to avoid that if at all possible. 

[Reeegman]

Michael,
Need to get on a call right now.....you most likely have LACP block issue....
http://docs.ruckuswireless.com/fastiron/08.0.70/fastiron-08070-l2guide/GUID-35DFAD56-2479-4FA1-A448-...
Check this out...make sure you meat all criteria for LAG formation......

[simon_pollard]

Hi Michael

There were changes to LAG operation in release 8.0.61 which may be causing issues as you have 8.0.30 on one node and 8.0.70 on the other. I would recommend upgrading the 8.0.30 node to match the other switch and make sure you have dynamic LAGs configured. Or migrate them both the 8.0.90d.