CommScope RUCKUS Community Forums

keith_gipe · 03-09-2015

I would love to see the capability to limit the duration a user can create a Guest Pass for in the new self-service portal. Currently users can set a Guest Pass to be active for 10 years if they want and I cannot limit that. Just like there is a De...

keith_gipe · 12-04-2015

There is a role for that already. If you look under the Administrators, there is a Guest Pass Generator role there, and then you would tie an account from the Administrator Domains to that. It is a little clunky and not super clear, but that is how...

keith_gipe · 07-14-2015

We are running R300's on a ZD3000 on 9.12.0.0.336 and we are not running into this issue. I had noticed this issue with R700's before, but not since the upgrade. Hope it helps!

keith_gipe · 07-10-2015

So I just tested this myself and found that Psiphone isn't actually bypassing Guest on our's. What is happening is it realizes it can get to the Internet over the 4G connection instead and pushes traffic out that. I verified this by going to whatis...

keith_gipe · 03-10-2015

You can create WLAN groups for each location that only have the SSIDs you want broadcast selected, then create AP groups that have the AP's for those locations in them and override the default WLAN group there.

keith_gipe · 08-25-2014

I know what the problem most likely is as we have experienced this exact issue multiple times. When your site-to-site tunnel blips because of a connection issue, the traffic from the AP to the ZoneDirector then automatically tries to route out your ...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Guest Pass Duration Limit

Re: Vscg - Cannot create role for guest pass creation

Re: R300 - Clients cannot connect after some time

Re: psiphone

Re: All SSID's are broadcast but I just want the local SSID's visable at the current location

Re: R700 APs (previously connected) on remote subnet disconnected from ZD