CommScope RUCKUS Community Forums

I'm looking at the spec sheets for the R720 and it states that on PoE the 2.4Ghz radio is in 1x4 mode at 18dbm per chain, at PoE+ it is in 4x4 mode at 18dbm per chain, and at PoH is in 4x4 at 23dbm per chain.  I have a PoE+ switch, and range is much ...

I have decided to move to a virtual SmartZone controller because Ruckus informed me that the new SmartZones would allow autonomous WLANs to continue running on meshed APs if the controller isn't reachable and that the ZD was not capable of that.  I h...

R700 APs on remote subnets show disconnected, although they are pingable by the ZD, have the correct ZD address (discovered by DNS name), and can ping and traceroute the ZD by both IP and DNS name. I don't really understand why they are not connec...

I'm new to the Ruckus setup and am configuring a ZD 3000 for deployment next week. I would love to take advantage of some of the fancy security and accounting features but I am also concerned about a ZD failure and losing the wireless network. For ...