We have a customer with 3COM equipment. A 7700 series Layer 3 switch where all vlans are defined, and a 3COM 4400 series edge Layer 2 switch where some access points are connected.
The port from the 7700 to the 4400 is configured as a trunk on th...
I'm wondering if the problem may be a mixture of having Native VLAN 1 in some parts of the network, and setting the Management VLAN 2 as Native in other parts of the network.
I'm walking into an existing location and trying to overlay Ruckus on top ...
APs are managed by a ZD.
VLAN 2 is set as a "Management" VLAN, but there is also a VLAN 1 set a "Default" VLAN. The ZD and APs all have IP addresses in the "Management" VLAN.
There is a mix of Cisco/3COM switches. The ZD is connected to a Cisco SG...
Yes, been a while, but yes. We have a ton of these set up using VLANs on Cisco equipment with no problem. I have not worked at all with 3COM and wanted to make sure that it will actually work before I spend a day messing with it only to find out some...
