Issue:
I have 3 ZF7962s, all on the same LAN/Subnet, running IPv4.
All 3 ZF7962s are controlled by a ZoneDirector 1106 running 9.7.1.0 Build 17.
I run them in mesh configuration. The ZD connects to the network switch. ZF1 connects to the ZD. ZF...
After performing Michael's recovery procedures, ZF2 now displays a proper IP address from the router. It is operating in mesh mode. ZF3 still displays the old static IP address. It is still disconnected from the mesh.
Hello, Amit.
I like the general theme of your idea.
Perhaps, we could access the ZD, click on Administer, and then, click on XXXX. This would display a page that provided several options for gathering, sorting, and providing the aggregate network ...
Hello, Michael.
Thank you for responding promptly to my posting.
The ZD and ZF1 connect to the network switch (as they always have). I connected ZF2 to ZF1 with a short Cat-5 cable, and, I connected ZF3 to ZF2 with a short Cat-5 cable. I did this...
Excellent idea.
Ruckus could add a QR Code sticker to the hardware chassis. The QR Code would contain everything:
- model number
- part number
- serial number
- MAC address
- IP address
- manufacture date
- all other relevant d...
