CommScope RUCKUS Community Forums

lks · 10-25-2023

Hello Ruckus Pack,I have four 7450 Switches with two 1Port 40Gig Modules installed in the rear slots.I want to build a stack with all 4 Switches. But when I stack connect them (via 0.5m QSFP+ passive DAC Cable) some ports of the switches are not comi...

lks · 12-15-2023

Hi, after a long time with the support I got all (4) switches replaced. With the new switches the problem is gone. Now my stack is working fine. So for me the problem was the really in the switch not in the modules or cables.

lks · 12-06-2023

Hi frnkblk, Im currently still in contact with the support. I will let you know if there is anything new. Currently we ware testing with new, replacement hardware.

lks · 10-28-2023

Hi Ben, just for your info: I tried building the stack with the 10Gig Ports - no Problems. Works like a charm. I have an open ticket, if the hardware is the problem. We will see. Thanks for your help

lks · 10-26-2023

SSH@SW02#show runCurrent configuration:!ver 09.0.10h_cd2T211!stack unit 1module 1 icx7450-48-port-management-modulemodule 2 icx7400-xgf-4port-40g-modulemodule 3 icx7400-qsfp-1port-40g-modulemodule 4 icx7400-qsfp-1port-40g-modulestack-port ethernet 1/...

lks · 10-26-2023

Hi Ben, as Im still troubleshooting I found that my ports going to state blocking. I want to do a 40 gig ring stack with the four switches. - and have them cabled like that... When I want to build the stack I get the infos that the ports need to be o...

CommScope RUCKUS Community Forums

User Statistics

User Activity

ICX 7450 40Gig Stacking/Uplinks not possible

Re: ICX 7450 40Gig Stacking/Uplinks not possible

Re: ICX 7450 40Gig Stacking/Uplinks not possible

Re: ICX 7450 40Gig Stacking/Uplinks not possible

Re: ICX 7450 40Gig Stacking/Uplinks not possible

Re: ICX 7450 40Gig Stacking/Uplinks not possible