CommScope RUCKUS Community Forums

Miketallica · 03-17-2025

Hello, as I got home today I noticed the lights were all off in my AP. No storms no known power surges to the home and the switch is plugged into a surge protector also. I went to the smart closet to check the power for the switch. All lights were of...

Miketallica · 08-25-2023

Hopefully someone has found a fix for my issue and I just haven't found it on the forums,Home was built by lennar in 2018 has n R510 AP and icx 7150 c12p switch, been working fine since until two days ago power surge hit the neighborhood and when i w...

Miketallica · 10-04-2023

I was able to perform a software recovery thanks to your help and patients with me. However after re-installing the switch in the smart cabinet and booting the network back up the network is very spotty like, the wifi and ethernet connections have sp...

Miketallica · 10-03-2023

Well I was able to console in and I changed all my settings per the instructions but I am stuck with a 'host not alive' issue. Attached are the images of how I have the switch physically connected to the pc and the a screen shot of the settings. Not ...

Miketallica · 10-02-2023

Well I performed the reset sequence 16 times, just for good measure,and allowed for about 3 minutes I between reset cycles however it’s gotten a little late for me and I’ll have to try the software recover process tomorrow since it doesn’t appear tha...

Miketallica · 09-30-2023

Any help would be much appreciated. I took the switch to a a network professional and they too were unable to console in. The pc being used does not recognize a connection when plugged in to a usb port using usb-c to usb-a cable.

CommScope RUCKUS Community Forums

User Statistics

User Activity

ICX 7150 no power issue

Can't console into icx7150-c12p via usb type c

Re: Can't console into icx7150-c12p via usb type c

Re: Can't console into icx7150-c12p via usb type c

Re: Can't console into icx7150-c12p via usb type c

Re: Can't console into icx7150-c12p via usb type c