Reset house power while troubleshooting an electrical issue, now Ruckus access point network is very slow or fails to load url requests despite speed testing well. Ruckus app won’t allow me to log in to manage the AP based network.
Carefully following the CLI for ssh into the box was the ONLY way this was fixable. I'm not certain why the GUI is suggested, it failed at least 5 times. The GUI and CLI both now report that the SPS prefixed boot image is being used to boot, and I've...
I'm still having issues, nothing seems to be working correctly.I've followed the guide numerous times, except when i reboot and login the image shows SPR each time. No amount of reboot or boot sequence settings changes this.I've attempted SSH and Tel...
So the primary guide with picture of the GUI for switch says in bold text "Select primary flash", but the picture itself shows that "Secondary flash" has been selected. Cross referencing the CLI guide, that guide states "secondary flash" is needed. ...
I've followed the guide fully, however on logging back in to the switch, the "Monitor>Device>Running Image Version" is still showing the "SPR" instead of "SPS". Is that an issue?
This is the link that should replace your first link as a guid for fixing this issue. I've made it about halfway through, and I can see from the "Running Image Version" section of Monitor>Device that I'm running the SPR (routing) not SPS (switch). I'...
