hi admin and all friendsi got problem with R310 ap...all server/controller ip already put via putty...after the ap is up...i cannot see it in my zone controller...other r310 working fine.. ..only this 3 ap is problem attach the pic below..pls help...
pls help..already use file SPS08080f.bin....SPS08090d.bin....SPS08095kufi.bin...SPS08095jufi.bin...still got error and failed....got this when printenv ICX7150-Boot>printenvbaudrate=9600ipaddr=192.168.1.4serverip=192.168.1.5netmask=255.255.255.0gatew...
hi admin...right now im very confuse...refer picture below....same controller ....same version..same firmware...but cannot auto enter to staging zone controller...please help
hi admin...can help me regarding this problem...i dont know what to do,...but the AP now using R310 standalone firmware ver 102.0.0.0.5.....below the firmware for virtual SZ
hi admin...i already upgrade ruckus R310 firmware to unleashed ver200.7.10.202.145...but i cannot enter the dns server for controller virtual smartzone..pls help
- Have you tried logging into AP via zone credentials (AD admin logon)?not yet...pls guide how to do it- Is there another controller in the network?noe..only 1 controller- Is DHCP opt 43 enabled in server?already enable ...coz other R310 is up- From ...
hi...it will become like this....the light is static mean it already got dhcp...but i cannot see it in controller in staging zone....pls help...and also cannot login to putty using super and sp-admin
