Hi KGBC4008,The antenna cable part number is available in the AP datasheet. Please refer to the 'Optional Accessories' section in the datasheet at the following link: https://webresources.ruckuswireless.com/datasheets/e510/ds-ruckus-e510.htmlAddition...
Hi Octavian_25Please refer to the following document link and YouTube video for detailed Mesh configuration steps. https://docs.commscope.com/bundle/sz-710-apswitchmanagementguide-sz300sz144vsz/page/GUID-5B01CDB2-84C0-44D1-BFD3-A1A047B9EF6F.htmlhttps...
Hi Sterlingj,You will have to configure DHCP option 43 for auto discovery of the controller IP. Please refer to the community post for more information on AP discovery methods: https://community.ruckuswireless.com/t5/RUCKUS-Self-Help/How-the-APs-disc...
Hi Sterlingj,Please ensure that the AP is running on latest solo firmware. Then, run the following commands from AP CLI access.set scg ip <IP_address_of_the_controller>set scg resetRegards,Kiran Raval
Hi Aimannfaizz,Please review the following points to help isolate the issue:Check if there is a firewall in the network that may be restricting traffic. If so, try switching to a VLAN without firewall restrictions and confirm whether this resolves th...
