CommScope RUCKUS Community Forums

tim_morton_7322 · 07-23-2015

Evening folks I am deploying a number of R600s and T301s around a client site. Thinking that I would be a clever dude and get the most out of my APs, I trunked 2 ports on my ProCurve switch and then plugged in cables to the APs. Well, long story sho...

tim_morton_7322 · 09-30-2017

You can get APS with the unleashed software, which means that they have their own controller software built in. The other way is to get a traditional controller, which is my preferred way to go.

tim_morton_7322 · 08-29-2017

I should have added the following:It is the vendor controller identifier and HEX value of the IP address.https://support.ruckuswireless.com/answers/000004456

tim_morton_7322 · 08-29-2017

It is the vendor controller identifier and HEX value of the IP address.https://support.ruckuswireless.com/answers/000004456

tim_morton_7322 · 08-29-2017

If you are using a Windows DHCP server or have access to one, you can put in the IP address of the ZoneDirector on the far left side and that will automatically put in the Binary and Data values. You should be able to take the Binary info and move it...

tim_morton_7322 · 08-23-2017

Like Abilash said, it would give up and see my dresses as your ad DHCP. Having a duplicate IP addresses on your network is never a good thing. The best thing that you could do is create a separate VLAN for your wireless clients. Then you can have yo...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Why the dual NICs on the R600 and T301 AP's

Re: Setting up a group of R510s is a controller needed?

Re: DHCP Option 43

Re: Handy tool: DHCP Option 43 builder

Re: DHCP Option 43

Re: Using DHCP on the Zone Director