CommScope RUCKUS Community Forums

john_lotz_68378 · 10-02-2014

I have a zone director 1106 (running 9.8.1.0 build 101) connected to 3 7363 APs and have very low throughput over the wireless network. This is both for internet traffic on TimeWarner Business Class with 200mpbs down and 20mpbs up and over the local ...

john_lotz_68378 · 10-13-2014

Thank you. It's my understanding that my APs do NOT have the Ruckus Spectrum Analyzer feature. As noted, I've considered purchasing a spectrum analyzer but I'm not sure the knowledge will do any good as I doubt I can change what is causing the prob...

john_lotz_68378 · 10-13-2014

Thank you all for the replies. Working with support, we narrowed the problem to 2.4ghz and enabled channelfly which did not resolve the problem. I now believe that I have non-wifi 2.4ghz interference that kills wifi performance. Note that I understa...

john_lotz_68378 · 10-02-2014

I was able to create WLAN groups for the 2.4 and 5 test WLANs and then for the AP I'm testing with, configured that AP to limit to the specific group I was testing while disabling WLAN service for the radio I was not testing. When on 2.4, I got abo...

john_lotz_68378 · 10-02-2014

How do I do this? Sorry, end of the day and can't figure this out as I see no way to create a WLAN that only uses 2.4 or 5. I unchecked the box for Enable WLAN service for this radio under Configure|Access Points for the AP that the test device is ...

CommScope RUCKUS Community Forums

User Statistics

User Activity

ZD 1100 and 7373 APs: Very slow throughput

Re: ZD 1100 and 7373 APs: Very slow throughput

Re: ZD 1100 and 7373 APs: Very slow throughput

Re: ZD 1100 and 7373 APs: Very slow throughput

Re: ZD 1100 and 7373 APs: Very slow throughput