The migration process and doc you are referring to is old, it should still work but there are ways to get it done with out doing it that way. With the new SZ code it might be easier, depending on your AP to controller topology. If all your APs are c...
All true, I forgot to add that not only do you have to have the AP support license you have to have all your APs supported across all the controllers as well so controller version should be the same. That being said the 1100 will only go so high and...
Yes it's possible. You are talking about an N+1 situation. You can do this in the Configure>Access Point> Access Point Policies, enable "Limited ZD Discovery" set the "Prefer Primary ZD" and configure the AP to only connect to two ZD IP address/nam...
Yes, you will need to set it up as a 2 Port config. Port1 (Eth1 OR 2) for Management/cluster/control and Port2 (Eth 3 OR 4) for (client) Data (termination)Sid
Andrea hit it on the head, and in the right order. I came from a company that did offer that client tunneling feature (IP mobility I think it was called), but that had it's own issue. A good example of this short coming is if your "home" network is...
