I"ve tried 3 types of switches all will 30watts per port and in the unleashed web interface it indicates it isn't getting enough power. I've tried 2 30watt POE injectors and it still shows the ...
Hello All, We are currently working on a way to setup a sort of out-of-band management system in our small environment. Basically a mini PC will be connected to the 12port ICX7150 and the 12port wil...
Hola, existe alguna forma aparte de utilizar la opción de "invitados" para crear un red wifi aislada de la LAN, es decir, quiero crear una red wifi que no vea mi LAN ni servidores solo con salida a i...
Hello, We have 2 Ruckus ZD1200 in HA mode. I would like to configure mail alert if any AP goes down. Test Notification works, but I tried to restart AP but there is no alert appeared. As I see confi...
H550 Standard AP Want to upgrade to Unleashed H550_200.12.10.5.234.bl7 using local Connected over Ethernet. The following error occurred: Failure Reason: [AP RFW : Unable to resolve host name for...
Hello, I have a lot of R550's getting powers from different manufacturer switches but they all seem to have the same warning about not getting enough power. These are running the...
rkscli: I am trying to login at ruckus cli and getting only this option not able to go in enable mode or config mode only rkscli: this is showing after login and no commands are w...
Hi.
I just bought a ZD1200. It was new, but i bought it over Ebay.
I have a ZD 1000 and wanted to upgrade it with the ZD 1200 because i want to connect more than 25 Acces points.
On the o...
When I try to connect the R500 AP to the SZ-100 E controller. In that case, that particular AP's mesh role is turned down to the disabled state. Then I checked the scg configuration through the AP's ...
Newby here
I have a 7150 stack and have a bootrom mismatch. I tried to update the bootrom using TFTP
copy tftp fla 10.70.11.143 mnz10115.bin bootrom but got the error
Inval...