I am wanting to send SNMP traps from the vSZ server to one of our monitor servers but I can not find where to enter the SNMP host information in the vSZ interface. Virtual SmartZoneEssentials 6.1.0...
Hello, I can't find any information about DFS event format. Here are 2 examples from the same AP, running 80mhz channel. 1. Why does it show the same channel more than once in examples a and b? Exa...
i have a new device which has a fresh installation. smartzone running 6.1.1.959. AP Ruckus R550(2) hast been tested on the device. appeared online on smartzone 144 but that AP status i think is not m...
During wireless usage, client access is slow, and testing has found that the client's ping packets have dropped severely with high latency. How can this situation be resolved on AC?
Hello everyone. Thank you for all your help.
I have been experiencing the following symptoms for several weeks.
When I check the traffic information on the APs registered with vSZ-H, there are t...
Hi pack, Can someone explain how the automatic gateway detection works when you use client isolation? I have an end customer where this is not working: Clients who connect to the BYOD SSID with...
Good day! I'm looking for guidance or instructions on changing the IP address of a Ruckus Virtual SmartZone (vSZ) controller. I'd appreciate any step-by-step instructions. Our vSZ controller i...
We are utilizing Ruckus internal DPSKs on our wireless network, however, we have run into an extremely unique scenario that only seems to be affecting older iPads. Virtual Smartzone C...