zonedirector 1000
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-01-2017 11:50 AM
I am not able to access the zonedirector 1000 via browser, it is only in that screen below.
Freezes on this screen and does not open the manager, I've tried in other browsers and also other machines, it's the same thing.
Freezes on this screen and does not open the manager, I've tried in other browsers and also other machines, it's the same thing.
13 REPLIES 13
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-01-2017 01:21 PM
Hi Geraldo,
Have you tried a power cycle? Does it still answer ping, but not HTTPS?
Have you saved a backup configuration since your last changes? You may
need to try a factor default (indented button on front) for 8+ seconds, and see
if you can reach it at 192.168.0.2 or not. If so, restore your backup.
If not, the light bulb in my living room that I never turn off, went out last night. =:^(
Sorry for the lame attempt at humor on Fri before Labor Day in US vacation, but
sadly too, the ZD1000 has reached it's Last Day to Repair or Replace = 8/31/2016
according to the end of sale documentation.
https://support.ruckuswireless.com/documents/177-zd1000-end-of-life-notification
Have you tried a power cycle? Does it still answer ping, but not HTTPS?
Have you saved a backup configuration since your last changes? You may
need to try a factor default (indented button on front) for 8+ seconds, and see
if you can reach it at 192.168.0.2 or not. If so, restore your backup.
If not, the light bulb in my living room that I never turn off, went out last night. =:^(
Sorry for the lame attempt at humor on Fri before Labor Day in US vacation, but
sadly too, the ZD1000 has reached it's Last Day to Repair or Replace = 8/31/2016
according to the end of sale documentation.
https://support.ruckuswireless.com/documents/177-zd1000-end-of-life-notification
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-01-2017 01:57 PM
The problem is that I did not back up and that's why I can not reset, does it have no other way to access?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-01-2017 03:35 PM
yes via ssh, so try to connect via ssh or via serial and see if you can access there.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-04-2017 04:20 AM
Not works yet, I try to ssh and serial without success

